45ft Heavy Duty Aluminum Commercial Work Boat

Product Advantage

• Heavy duty aluminum work vessel – 5083 aluminum with full-penetration welds; impact-resistant and corrosion-proof; 30+ year service life.

• 45ft multi purpose commercial boat – One hull, many roles: cargo tender, crew boat, fishing platform, patrol craft, or small passenger ferry.

• Corrosion resistant marine alloy – No painting or gelcoat; self-healing oxide layer eliminates rust and blistering.

• Fuel efficient diesel inboard – Twin 300HP diesels consume only 60 liters/hour total at 20 knots; range over 400 nautical miles.

• Large cargo deck capacity – 25 sq meters (270 sq ft) of clear deck; reinforced for palletized loads, fish bins, or dive equipment.

• Shallow draft coastal operation – 1.1 meter draft allows river access and beaching for cargo unloading in remote areas.

• Walkaround side decks – Full-length, 0.6 meter wide side decks with high bulwarks and handrails; safe crew movement.

• Low maintenance commercial craft – Self-bailing deck, sealed electricals, and tool-less access to filters and belts.

Technical Parameters

Product Uses

• Cargo and supply tender – Transport fuel, water, food, and equipment to remote camps, islands, or fishing vessels. Large cargo deck capacity handles palletized loads.

• Fishing support vessel – Carry catch from smaller boats to shore. Heavy duty aluminum work vessel withstands rough handling and salt.

• Crew transfer boat – Shuttle 12-15 workers to offshore platforms or aquaculture sites. Walkaround side decks allow safe boarding at ladders.

• Patrol and enforcement – Shallow draft coastal operation enables access to shallow coves where smugglers hide. Can be armed with searchlight and siren.

• Dive charter platform – Accommodate 8 divers with tanks. Low maintenance commercial craft makes cleanup easy after saltwater dives.

• Emergency response – Equipped for search and rescue or oil spill containment. Fuel efficient diesel inboard provides long loiter time.

• Small passenger ferry – Certified for up to 20 passengers on protected waterways. 45ft multi purpose commercial boat converts to seating.

Product Operate Guide

.Follow these steps to safely operate this low maintenance commercial craft. Pre-departure: inspect corrosion resistant marine alloy hull for cracks or dents, especially near welds. Check fuel efficient diesel inboard engines: oil, coolant, fuel, and seawater strainers. Verify walkaround side decks are clear of obstructions. For shallow draft coastal operation, note tide levels and underwater obstructions. Start engines and warm up for 5 minutes. When loading large cargo deck capacity, distribute weight evenly – max 5 tons centered. Under way as a 45ft multi purpose commercial boat, cruise at 18-20 knots in calm conditions; reduce to 10 knots in rough seas. The heavy duty aluminum work vessel can beach for loading/unloading – tilt propellers before grounding. After each shift, flush engines with fresh water if raw-water cooled. Clean deck and scuppers. Weekly: inspect anodes and through-hulls. Monthly: test bilge pumps and emergency steering. Annual dry-dock inspection required for commercial certification.

Product Video