Dookyu Crown 36ft Aluminum Multi Purpose Work Boat

Product Advantage

• Heavy duty aluminum multi purpose boat – 5083 aluminum with full-penetration welds; impact-resistant and corrosion-proof; 25+ year service life.

• 36ft commercial work vessel – Versatile platform: cargo deck (15 sq m), passenger seats (12 pax), or fish bins. Change roles in hours.

• Corrosion resistant welded hull – No rivets, no wood, no gelcoat. Self-healing oxide layer eliminates rust and blistering.

• Flexible deck configuration – Pre-installed track system for removable seats, cargo rings, or deck boxes. Reconfigure without tools.

• Fuel efficient diesel inboard – Single 250HP four-stroke diesel; 30 L/h at 18 knots; range over 350 nautical miles on 600L tank.

• Shallow draft utility craft – 0.9 meter draft (0.4m with engine tilted); launch from beaches or shallow ramps.

• Easy cargo loading design – Low freeboard (0.8m) and optional bow ramp for rolling containers or pallets. Forklift compatible.

• Low operating cost workboat – Minimal maintenance: no bottom paint needed (aluminum), annual inspection only. Fuel cost half of comparable fiberglass boats.

Technical Parameters

Product Uses

• Cargo and supply tender – Transport building materials, fuel drums, or food to remote islands. Easy cargo loading design with bow ramp allows drive-on/drive-off.

• Passenger ferry for short routes – Carry up to 12 passengers with bench seating and canopy. 36ft commercial work vessel certified for protected waters.

• Fishing support boat – Collect catch from small fishing boats and transport to market. Flexible deck configuration accommodates fish totes.

• Harbor patrol and inspection – Shallow draft utility craft can check moorings and navigate tight marinas. Low operating cost workboat ideal for daily use.

• Aquaculture service vessel – Deliver feed and harvest oysters/salmon. Corrosion resistant welded hull withstands constant saltwater exposure.

• Dive or research platform – Carry 6 divers with gear. Fuel efficient diesel inboard provides long loiter time at idle for survey work.

Product Operate Guide

Follow these steps to operate your low operating cost workboat. Pre-launch: inspect corrosion resistant welded hull for cracks, especially near welds. Check fuel efficient diesel inboard engine: oil, coolant, fuel filters, and seawater strainer. For easy cargo loading design, ensure bow ramp (if fitted) is secured. When using flexible deck configuration, verify all removable seats or cargo rings are locked. As a shallow draft utility craft, tilt engine when entering water less than 1 meter deep. Start engine, warm up for 5 minutes. Under way as 36ft commercial work vessel, cruise at 15-18 knots for best efficiency. For heavy duty aluminum multi purpose boat, avoid overloading beyond 3 tons cargo. After each shift, flush engine with fresh water if raw-water cooled. Clean deck and scuppers. Weekly: check anodes and through-hulls. Monthly: test bilge pumps. Annual dry-dock inspection recommended.

Product Video