Dookyu Crown 56ft Triple 600HP Aluminum Luxury Sport Yacht

Product Advantage

• Triple 600HP outboard luxury yacht – Three 600HP Mercury V12 outboards deliver a combined 1,800 horsepower. 0-30 knots acceleration in under 20 seconds. Triple engine redundancy: if one engine fails, two remain fully operational for safe return.

• 56ft high speed sport cruiser – Length overall 17.18m, breadth moulded 4.20m, depth moulded 2.00m. Generous interior volume with 2m+ headroom throughout. Three private cabins and two heads for overnight comfort.

• CE certified aluminum vessel – Full compliance with EU Directive 2013/53/EU for passenger vessels. CE marking ensures free market access across the European Economic Area. Certified for commercial passenger operation up to 12 persons.

• 53 knot performance catamaran – 53 knots top speed (49 knots cruising). 1820L fuel tank provides 300+ nautical mile range at cruising speed. Reaches distant destinations in record time – ideal for competitive sport and high-end charters.

• Offshore sightseeing entertainment boat – 360° unobstructed views through panoramic windows. Spacious aft deck with U-shaped seating, wet bar, and premium sound system. Fold-down side terraces create beach-club-style social areas.

• 5083 marine grade alloy hull – 5083/H116 marine-grade aluminum with full-penetration TIG welds. 30% lighter than steel with superior strength-to-weight ratio. No rust, no osmosis, no gelcoat cracks. Self-healing oxide layer eliminates painting.

• Twin step deep V design – Optimized hull form with twin lifting strakes reduces drag by 15% at planning speeds. Exceptional seakeeping in 2m+ seas. Spray rails keep the deck dry even in rough conditions.

• Luxury day charter platform – Accommodates 12 passengers with premium leather seating. Full galley, refrigerator, and ice maker. Shallow draft (0.64m) allows access to secluded coves and beaches. 200L freshwater capacity supports extended day trips.

Product Uses

• High-speed sport cruising – Experience the thrill of 53 knots. The triple 600HP outboard luxury yacht delivers adrenaline-pumping performance for owners who demand the ultimate in speed and handling.

• Luxury sightseeing charters – Take up to 12 guests for whale watching, coastline tours, or skyline cruises. CE certified aluminum vessel ensures full commercial compliance. Panoramic windows provide uninterrupted views.

• Island hopping expeditions – Visit multiple islands in a single day. 53 knot performance catamaran covers 150 nautical miles in under 3 hours – a journey that would take conventional yachts 6+ hours.

• Corporate entertainment – Host clients, partners, or team events in unparalleled style. The luxury day charter platform features wet bar, premium sound, and beach-club-style side terraces for sophisticated social gatherings.

• Sport fishing adventures – Reach offshore canyons and fishing grounds before the competition. Twin step deep V design provides a stable platform for battling marlin, tuna, or sailfish.

• Special events and celebrations – Birthdays, anniversaries, or private parties. The 56ft high speed sport cruiser offers spacious decks, full galley, and overnight accommodation for up to 6 guests.

Product Operate Guide

To safely operate this CE certified aluminum vessel, follow these procedures. Pre-departure: inspect 5083 marine grade alloy hull for any cracks or damage, especially around weld seams. Check triple 600HP outboard luxury yacht engines – oil level, fuel, water separators, and tell-tale water flow on all three units. Test steering, GPS, radar, VHF radio, and navigation lights. For twin step deep V design operation, lower all three engines, start, and allow 5 minutes warm-up. Before carrying guests on this luxury day charter platform, brief them on safety procedures, no-go zones, and life jacket locations. As a 53 knot performance catamaran, maintain 35-40 knots for optimal fuel efficiency and passenger comfort; reduce to 20-25 knots in choppy conditions. The 56ft high speed sport cruiser planes at 15 knots – use trim tabs to level the ride. Monitor fuel consumption every 100 nautical miles. After each trip: flush all three engines with fresh water (especially after saltwater use), rinse deck and hull, check bilges for water. Daily: check anodes. Weekly: inspect propellers and through-hulls. Monthly: test all electronics and emergency equipment. Annual dry-dock inspection recommended to maintain CE certification and hull integrity. Always carry sufficient life jackets for all passengers and crew, and file a float plan for extended offshore passages.

Product Video